14
6.2. Speed Adjustment
There are 9 speeds available for both dispensing and
aspiration. The speed is indicated in the bottom left
hand corner of the display. The default speed is 5 for
all operating modes.
Speed can be adjusted during the programming by
completing the setting changes with the select key.
In every operating mode the speed adjustment is the
last programming step. After adjusting the “speed out”
the programming is completed with enter or select key
and the pipette is then ready for operation.
NOTE: The P
MANUAL mode includes 5 different
dispensing and aspirating speeds.
7. Pipette Modes
The mode range PIPET includes 6 different operating
modes.
Symbol Description
SP Super Pipetting performs pipetting
with super blow-out function
enabling dispensing of very small
volumes from the air. SP-mode is
available only in eLINE® 5 µl pipette
P Pipetting with automatic blow-out
rP Reverse pipetting without blow-out
P + MIXING Pipetting with blow-out followed
with mixing function
P COUNT Pipetting with blow-out and
displayed cycle counter
P MANUAL Manual pipetting with on-line
volume display
To Next Page
Loading...
Need help?
General
