18
10. Select the speed out with (1= Min and 9 =
Max)
11. Press
or to confirm selections
12. Position the tip to aspirate and press the START
button
13. Position the tip to dispense and press the
START button
. The tip is emptied with blow-
out and the piston returns automatically back to
the home position. The pipette is ready for next
pipetting.
NOTE: To change the cycle number or to reset the
counter during the pipetting, press the
to display
the desired cycle number and confirm with
.
7.4. Manual Pipetting (P MANUAL)
(Not available in multichannel models)
In the manual pipetting mode the aspiration and
dispensing are controlled manually. The aspiration
or dispensing continues as long as the START button
is held down (within the selected volume range).
The aspiration/dispensing direction can be changed
during pipetting by using the arrow key. In the manual
pipetting mode the display always shows the actual
amount of sample in the tip.
1. Press
to display PIPET
2. Scroll with
until the symbol P MANUAL is
displayed.
3. Confirm by pressing
4. Select the desired pipetting volume by using
NOTE: When holding down the volume display
starts to scroll faster.
5. Press
to confirm selection and to display the
To Next Page
Loading...
Need help?
General
