Sartorius eLINE User Manual

25
1. Press to display MULTI
2. Scroll with
until the symbol Ad is displayed.
3. Confirm by pressing
4. Select the desired dispensing volume by using the
NOTE: When holding down the volume display
starts to scroll faster.
5. Press
or to confirm the selection and to
display the aliquots
6. Select the desired number of aliquots with
7. Press or to confirm selection
8. Select the desired dispensing pace with
(0.1 -
9.9 seconds)
9. Press
to confirm the selection and to display
the speed in or press
and continue from Step
14.
10. Select the speed in with
(1= Min to 9 = Max)
11. Press
or to confirm selection and to
display the speed out
12. Select the speed out with
(1= Min to 9 = Max)
13. Press
or to confirm selections
14. Position the tip to aspirate and press the START
button
. The display shows PRE OUT and arrow
down to indicate the reset function.
15.
Position the tip to discard priming excess and press
the start button
.
16. To dispense, position the tip, press the START
button
once and the pipettor dispenses the
aliquots at the specified pace.
17. Finally position the tip to discard any remaining
excess and press the START button twice
.

Sartorius eLINE Specifications

General

Brand	Sartorius
Model	eLINE
Category	Laboratory Equipment
Language	English