RIO Bravo User Guide / Revision 6 / Page 8 of 19
6. Enter Username and Password and click Submit. In our example we are using the default username:
SASDefault and password: sas as shown in Figure 7 below. Note that you won’t see the password
on your screen. Also note that you can change both Username and Password if needed.
Figure 7: Web Interface Access
7. If you have successfully logged in you should see the screen shown in Figure 8.
Figure 8: RIO Bravo Web Server Menu
8. Notice the grayed items in the upper left. We will refer to these as the User Menu. We’ll briefly
describe Network Config and Local System Information and describe Local Router Control in more
detail.
To Next Page
Loading...
General