What to do if the Sase Grinder motor does not switch on?
If the Sase Grinder motor doesn't switch on, first verify the main power supply and switch it on again. If the issue persists, a component may be defective and needs replacement.
Why Sase Grinder has reduced grinding performance?
If your Sase Grinder has reduced or no grinding performance, it could be due to several reasons. First, the grinding tools may be worn and need replacement. Second, the grinding tool may not be appropriate for the application, so replace it with the correct one. Finally, the V-belt may not have enough tension and needs re-tensioning.
How to fix excessive vibration in Sase Grinder?
Excessive vibration in your Sase Grinder can be caused by an imbalance due to worn or broken grinding tools or loose screws on the grinding disc. Replace any worn or broken parts and tighten the countersunk head screws on the grinding disc.
Why does my Sase Grinder make unusual noises?
Unusual noises from the Sase Grinder can stem from several causes. Check the bearing on the axle drive shaft and replace if necessary. Also, inspect the tension of the V-belt, replacing it if needed. Another potential issue is a defective motor bearing, which would require changing the motor. Lastly, clean the coupling to remove any debris deposits.
What to do if Sase Grinder motor triggers while running?
If the motor of your Sase Grinder triggers while running, it may be due to the motor protections switch being activated because of an overload. In this case, reduce the additional load. Alternatively, the motor itself may have a defect and needs to be checked.
Why does the screen on my Sase Grinder go blank?
If the screen on your Sase Grinder goes blank, it might be due to a lost phase. Check for 3 legs of power.
How to fix no voltage reading on Sase Grinder display?
If there is no voltage reading on the display of your Sase Grinder, it is likely due to a loose connection. Check the pin connectors on the interface.
Details risks associated with propane machinery: toxic emissions, fire hazards, and moving mechanical parts.
Outlines essential maintenance tasks like filter cleaning, oil checks, and proper storage for hazard prevention.
Covers safe handling, storage, and operational guidelines for propane cylinders to prevent fire and explosion risks.
Explains the machine's main parts and guides on initial positioning and diamond security for operation.
Details the operator controls, switches, and the procedure for safely starting the machine.
Covers the operation of the drum rotation clutch and how to adjust speed for optimal performance.
Provides instructions and precautions for safely transporting the machine.
Explains diamond abrasive composition, grit size effects, and bond types for optimal grinding.
Step-by-step instructions for safely removing and replacing diamond grinding discs.
Lists essential personal protective equipment like helmets, masks, goggles, and gloves.
Emphasizes crucial safety rules for machine operation, maintenance, and handling.
Provides an overall diagram of the PDG 6000 with numbered parts for identification.
Lists all components for the final assembly with part numbers and descriptions.
Exploded view of the motor assembly with numbered components.
Lists parts and quantities for the motor assembly.
Exploded view of the machine's frame assembly with numbered components.
Lists parts and quantities for the frame assembly.
Exploded view of the handle assembly with numbered components.
Lists parts and quantities for the handle assembly.
Exploded view of the control panel components with numbered parts.
Lists parts and quantities for the control panel assembly.
Exploded view of the complete drum assembly with numbered components.
Lists parts and quantities for the complete drum assembly.
Exploded view of the top plate assembly with numbered components.
Lists parts and quantities for the top plate assembly.
Exploded view of the belt tightener assembly with numbered components.
Lists parts and quantities for the belt tightener assembly.
Exploded view of the main spindle assembly with numbered components.
Lists parts and quantities for the main spindle assembly.
Exploded view of the planetary assembly with numbered components.
Lists parts and quantities for the planetary assembly.
Exploded view of the flex head assembly with numbered components.
Lists parts and quantities for the flex head assembly.
Exploded view of the tooling plate assembly with numbered components.
Lists parts and quantities for the tooling plate assembly.
Illustrates the routing and tension specifications for the main, PTO, and top belts.
Provides solutions for issues like vibration, unusual noises, and reduced grinding performance.
Checklist for safe startup and operation procedures for propane machines.
Safety guidelines related to machine maintenance tasks.
Comprehensive safety rules for handling, storing, and transporting propane cylinders.
Details the dangers of CO poisoning from exhaust emissions and exposure limits.
Form for acknowledging training on proper operation and safety hazards.
Outlines what is covered, exclusions, and conditions for the product warranty.
Explains how to submit a warranty claim and freight responsibilities.
Form for registering the product to ensure warranty validity.
General| Brand | Sase |
|---|---|
| Model | PDG 6000 |
| Category | Floor Machine |
| Language | English |
To Next Page
