SATA adam 2 Series User Manual

<< Operating Instructions SATA adam 2 >>
EN
VII.4
<< Operating Instructions SATA adam 2 >>
Warning! Risk of explosion!
• The SATA adam 2 / SATA adam 2 mini / SATA adam 2 display must not
be brought along with or used on a paint spray in explosive areas classi-
󰘰ed as Ex-Zone 0!
• Do not use solvents and cleaning agents based on halogenised
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
The electronic pressure measuring device has been submitted to a de-
sign examination and is developed, constructed and manufactured in
accordance with the EU directive 94/9 EU. It was classi󰘰ed to II 2 G Ex
ia IIC T4 FM Global IS CL I, ZN 1, AEx ia IIC T4 IS CL I, DIV 1, GP A,
B, C&D, T4 and may be used and stored in the explosive zones 1 and 2
up to 60°C ambient temperature. Inspection authority: KEMA 05 ATEX
1090 X.
Ex-sign
Equipment category
Gas category
Type of ignition protection
Temperature
classi󰘰cation
Device category Equipment category
II 2 G Ex ia IIC T4
II 2 G Ex ia IIC T4
IECEx label: IECEx KEM 09.0075
Warning! Risk of explosion!
The following applications and operations lead to the loss of the
explosion protection and are, therefore, prohibited:
• Battery replacement in explosive areas!
• Installation of a battery other than CR 2032, RENATA (
SATA Art. No.
160739)!

SATA adam 2 Series Specifications

General

Brand	SATA
Model	adam 2 Series
Category	Measuring Instruments
Language	English