Need help?Do you have a question about the Satel AVD-100 and is the answer not in the manual?
Unauthorized changes, modifications, or repairs void warranty rights.
SATEL declares AXD-200 complies with Directive 2014/53/EU.
Describes detector connection to controller for state updates and alarms.
Details alarm conditions based on detector type and tamper contact.
Explains active and passive modes for battery life and data transmission.
Enables extended battery life by reducing periodic communication frequency.
Facilitates detector testing with enabled LED indicator.
Describes LED flashing patterns for battery status and communication.
Provides information on low battery status when voltage drops below 2.75 V.
Details terminal block connections (COM, M1, M2) and tamper contact.
Procedure to select detector function (e.g., magnetic contact, temperature).
General| Power Supply | 12 VDC |
|---|---|
| Tamper protection | Yes |
| Detection Principle | Passive Infrared (PIR) |
| Sensitivity Adjustment | Yes |
| Output Type | Relay |
| Alarm output | Relay |
To Next Page
