SatKing ORBIT 85 - Searching the Satellite; Back to HOME Position & Turning Off; STB Power Detection On;Off

ENGLISH - 11
When STB power detection (Lock LED) is ON,
the antenna operates only while STB power is ON.
When STB power detection (Lock LED) is OFF,
the antenna operates with its controller regardless of STB power status.
※
※
5-2. Searching the satellite
a.
b.
c.
Select the satellite using the arrow buttons on the controller and press OK.
Lock LED will ash during search and become solid when the satellite is found.
If you have selected the wrong satellite, move to the correct satellite name using
arrows and press OK to conrm new satellite.
5-4. STB power detection On/O
a.
b.
c.
Ensure that the unit is turned o.
Press and hold right arrow button then also press the Power button.
When HOME LED becomes solid this means STB power detection is switched.
5-3. Back to HOME position & Turning o
a.
b.
c.
After use and before travelling, press HOME to return the unit to HOME position.
To fully turn o the unit, long press Power button when the unit is at HOME.
If you will stay in your location for an extended period or wish to save power you can
leave the unit up simply by pressing the Power button and powering the unit o,
the signal will still come through to your satellite TV receiver.