Operator's Manual: Models Saturn™ 140 & Saturn™ 230
4-25
Figure 4Q - Installation of the Optional Draft Inducer
WARNING: Turn OFF the main power to the furnace before proceeding with the installation of
the draft inducer.
ATTENTION: It is very important to install the draft inducer on a vertical section of stack to isolate the
inducer from excessive heat and ash buildup. Never install the draft inducer on a horizontal section of stack
close to the furnace breach where heat and ash will damage the inducer motor.
Installing the Optional Draft Inducer (continued)
NOTE: Lubricate the motor as recommended by the
Draft Inducer manufacturer.
To Next Page
Loading...