Adding Coolant
If you need more coolant, add the proper
DEX-COOL
®
coolant mixture at the surge tank,
but only when the engine is cool. See Engine
Overheating on page 334 for instructions on “How
to Add Coolant to the Coolant Surge Tank.”
{CAUTION:
You can be burned if you spill coolant
on hot engine parts. Coolant contains
ethylene glycol, and it will burn if the
engine parts are hot enough. Do not spill
coolant on a hot engine.
When replacing the pressure cap, make sure it is
hand-tight and fully seated.
Coolant Surge Tank Pressure Cap
Notice: If the pressure cap is not tightly
installed, coolant loss and possible engine
damage may occur. Be sure the cap is properly
and tightly secured.
If you need to replace your coolant surge tank
pressure cap, see your retailer.
Engine Overheating
You will find a coolant temperature gage and a
coolant temperature warning light on your vehicle’s
instrument panel. See Engine Coolant
Temperature Gage on page 174 and Engine
Coolant Temperature Warning Light on page 173.
334
To Next Page
Loading...
Need help?
General
