Step 6
416407 www.sauder.com/servicePage 10
å
Fasten the TOP MOLDING (J) to the TOP (C2). Use three
SILVER 1-1/8" FLAT HEAD SCREWS (10S).
å
NOTE: Do not overtighten the SCREWS into the TOP.
å
Fasten the BASE (I) to the ENDS (A2 and B2). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S) through the
METAL BRACKETS on the BASE and into the ENDS.
B2
C2
A2
J
I
SILVER 1-1/8" FLAT HEAD SCREW
(3 used for the TOP MOLDING)
10S
Curved edge
BLACK 9/16" LARGE HEAD SCREW
(4 used for the BASE)
1S
Curved edge
To Next Page
Loading...
