Step 9
416407www.sauder.com/service
Page 13
å
Fasten the DRAWER SIDES (D36 and D37) to the DRAWER
BACK (D175). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Slide the DRAWER BOTTOM (D982) into the grooves in the DRAWER
SIDES (D36 and D37) and DRAWER BACK (D175).
å
Repeat this step for the other drawers.
Groove
D36
D37
D175
Be sure the grooves in each part line up
with each other on the inside of the drawer.
Finished surface
These edges
should be even.
D36
D37
D175
D982
BLACK 1-9/16" FLAT HEAD SCREW
(16 used in this step)
30S
To Next Page
Loading...
