Step 10
416407 www.sauder.com/servicePage 14
å
Pull the DRAWER FRONT BRACKETS (9G) apart and slide
them into the grooves in the DRAWER SIDES (D36 and D37).
å
Fasten the DRAWER FRONT (H) to the DRAWER FRONT
BRACKETS (9G). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
Repeat this step for the other drawers.
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
1S
Push down
D36
D37
H
9G
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
To Next Page
Loading...
