1.5
96
INSTALLATION
When “00” is
displayed, select the
access code 96 with the +
or - keys.
o immediately press and
hold the "mode" button for
more than 10 s .
Access to the technical
data of the boiler
(use reserved for the
installer and the assistance centre)
28
A new press on
It allows you to set some
functions and analyze
any malfunctions.
Adjusting the heating circuit
flow rate The flow rate must
be adapted according
to the system's
requirements.
Pressing for approx
"mode" displays the first
parameter of the menu
which allows to know the
maximum power in
heating.
Act on the screw
a; (screw to close,
unscrew to open)
to adapt the head available
to the pressure drop of
the system.
1 10 sec. on the
"mode" button you have
access to modify the parameters.
Note : the display
returns to normal function
after one minute without operation
bar
3
a
1
2
Adjustments
10 s
3
2
Machine Translated by Google
To Next Page
Loading...
