Saunier Duval THEMACLASSIC C 25 E - Installation - Adjustment Menus (01-03); Heating Power Adjustment (Menu 01); Flue System Configuration (Menu 02)

10
02
03
01
38
15
Menu 02
Air/flue system
configuration This
function allows you to adapt
the Themaclassic F
24 E NOx boiler to the fume
extraction system used.
• Choose the desired
maximum power using the +
or - button.
Note: the reduction in the
heating power has no effect
on the domestic hot water
power.
power.
mode
mode
• When the Cod 01 menu
appears on the display, press
“mode” if you want to modify
the parameter value.
• Press on "mode" to confirm
the value of
• Press the + button to access
the next menu.
maximum yield.
chosen from the 4 proposed
in the Cod 03 menu : 38°C,
50°C, 55°C or 70°C.
This value can be
This possibility allows you to
adapt the power supplied to the
real need of the
installation, avoiding too
high a power and in order to
have the
mode
Menu 01
Heating power
adjustment The heating power
can be adjusted to a value
between the minimum and
maximum of the boiler power
pag. 12.
(from 0 to 10) corresponding
to the length of the exhaust
system (see table).
• Starting from the Cod 02
menu, press “mode” and then
the + or - keys to modify the value
Menu 03
Minimum temperature in
heating
29
For the other Themaclassics,
the adjustment must be
made using the
fumes diaphragm (see page 19)
Concentric duct Concentric duct
8
19 m
9
1
8,6 m
1,8 m
2
2,5 m
5
Val
Factory setting
28 m
4,2 m
5,7 m
3
5
6
8
7 m
Factory setting
Cod
Val
6,5 m
Double duct horizontal
(C12) vertical (C32) flow (C 52) length length length piping parameters piping parameters piping
parameters 2 to 4 m
1,3 m
3
9
22 m
3,5 m
10
31 m
3
0,8 m
9
2,8 m
6
10 m
Cod
7,2 m
4
0
Val
10 10
2
0.3 to 0.5 m 0
25 m
2
5 m
9,3 m
2 m
13 m
3 m
7
34 m
16 m
2 to 2.7 m 0
8
7
1
1,5 m
1
7,9 m
Factory setting
7
10 m
2,3 m
Cod
4
5
6
4
1 m
Machine Translated by Google