I have to be away
for a few days.
How can I check the
heating circuit pressure
when the temperature
appears on the
display?
In homes that are
not occupied for long
periods, evaluate
the possible emptying of
the system, or better, insert
a specific antifreeze liquid
available from your installer.
When the boiler is in
heating request, the
water temperature
actually appears on the
display. To verify
Can frost damage my
system?
9
the pressure, it is sufficient
to put the boiler on the
hot water only position ( )
in order to
interrupt the heating
request and the pressure
can be read on the
display. Then put it
back in the heating
position.
In case of absence
for a few days,
simply lower the setting
temperature
on your room thermostat.
Note that a programmable
room thermostat will allow
you to ideally select the
days, time slots and
temperatures of the
heating.
Choose a temperature that
will allow you to
quickly find a comfortable
temperature on
your return.
If your installation does
not have a room
thermostat, select the
minimum temperature
in heating and set
it on the display of your
boiler.
Machine Translated by Google
To Next Page
Loading...
