Copyright © 2018 Savant Systems, LLCEntry Service with 2N Door Stations Deployment Guide
009-1540-00 | 181026
12 of 29
5. Door Station Configuration
This section shows how to configure any of the Savant sold 2N Door Stations for use within a Savant System.
5.1. Connect/Login
To Connect and configure a 2N Door Station do the following:
1. Find IP Address of the Door Station.
Either use a any network scanning software or the 2N Network
Scanner.
NOTE: The “2N Network Scanner” application is available in the
Mac App Store (requires OS X 10.11.x or higher).
2. Open a web browser.
3. Enter the Door Stations IP Address in the web browsers address
bar.
4
3
4. Enter Username and Password for the Door Station.
The defaut username / password of 2N units is:
Username: admin
Password: 2n
NOTE: Once the default login credentials have been entered, an
immediate password change is required.
5.2. Firmware Update
This process should only need to be done the first time the Door
Station is setup.
In a web browser log in to the Door Station to be configured.
1. Select System.
1
2. Select Maintenance.
3
2
3. Click Upgrade Firmware.
To Next Page
Loading...
Need help?
General
