Savant REMOTE User Manual

SAVANT REMOTE AND BLASTER USER GUIDE28
SETTINGS
The Settings screen on your Savant Remote gives you access to controls for configuring your
Savant Remote. The Settings screen looks like this:
– About
The model number and FCC and IC numbers for your Savant Remote.
– Devices
A list of connect devices. Selecting a device displays a list of commands for that device.
– Brightness
A control for adjusting the brightness of your Savant Remote on a scale of 1 to 5. By default, the
brightness is set to 4.
– Wake Sensitivity
A control for adjusting how sensitive your Savant Remote should be to movement. There are
three settings:
– Low
– Mid
– High
By default, Wake Sensitivity is set to Mid.
– Sleep
A control for adjusting how long your Savant Remote needs to be idle before the Remote goes
to sleep to save power. Options include:
– 15 Seconds (the default setting)
– 30 Seconds
– 1 Minute
– 2 Minutes
The Settings screen

Savant REMOTE Specifications

General

Brand	Savant
Model	REMOTE
Category	Remote Control
Language	English