SAVANT REMOTE AND BLASTER USER GUIDE35
UNDERSTANDING LED STATUS LIGHTS ON SAVANT PRODUCTS
Savant products use the following codes on their LED status lights:
LED Status Light Description
O or no light present The device may not be powered on or connected to a power
source.
Rapidly blinking red The device is being reset to its factory defaults. After rapidly
blinking red, the light will glow solid yellow for a minute or less
and then begin slowly blinking yellow.
Rapidly blinking yellow The device is responding to a Locate command in the Savant
App.
Slowly blinking yellow The device is ready to be connected to your network.
Temporary solid yellow
(1 minute maximum)
The device is currently loading and should change when
finished.
Permanent solid yellow
(More than a minute)
Device cannot locate the Wi-Fi it was connected to originally.
Slowly blinking green The device is connecting to your network and establishing
communication with the Savant Host or Savant App. If the
blinking remains constant, the device is connected to Wi-Fi but
not to the Host.
Solid green The device has established communication with the Savant
Host and your network.
Slowly blinking yellow and
green
The device is receiving a software update over your Wi-Fi
network. Please do not unplug the device until the software
update has completed.
To Next Page
Loading...
Need help?
General
