SawStop JSS - Normal Mode Operation; Non-Conductive Materials; Starting in Normal Mode

What Are You Cung?
¿Qué está cortando?
Start your saw in normal mode to
cut NON-CONDUCTIVE materials
(see page 3).
Arranque la sierra en modo normal para
cortar materiales NO CONDUCTORES
(véase la página 3).
Normal Mode
1
www.sawstop.com
Non-Conducve Materials
Materiales no conductores
● Dry Wood
● Dry Plywood or OSB
● Dry Pressure-Treated Wood
● MDF
● Plasc
● Solid Surface
● Laminate
● Cardboard
● Foam
● Madera seca
● Madera seca contrachapada
u OSB
● Madera seca tratada a presión
● MDF
● Plásco
● Superficie sólida
● Laminado
● Cartón
● Espuma
Cung CONDUCTIVE material in normal
mode will cause the brake to acvate.
Si se corta material CONDUCTOR en el modo
normal, se provocará la acvación del freno.
Modo normal