SawStop JSS - Safety Precautions: Prohibited Actions; Never Touch Internal Components; Never Operate with Housing Removed; Never Disable Safety System

Never unplug the saw while the blade is spinning because the safety system will not acvate if you contact
the blade.
Never touch any internal components of the saw (such as the arbor, arbor nut, etc.) while
the blade is spinning because the brake may acvate.
Never operate the saw with any poron of the housing removed.
Never place your hands inside the housing while the blade is spinning.
Never aempt to disable the safety system or modify the saw in any way.
Never aempt to repair, adjust or modify a brake cartridge in any way.
24
www.sawstop.com
Only use SawStop accessories such as table inserts, guards and fences. Other accessories may cause the
safety system to acvate.