SawStop TSG-FDC - Product Specifications

1
TSG-FDC OWNER’S MANUAL
PRODUCT SPECIFICATIONS
Product Specications
Net Weight 58 lbs
Floating Blade Guard Dimension 3.5” x 18.5”
Distance Between Blade and End of Extension Table 35.75” to 68”
Inner Dust Tube Diameter 3”
Outer Dust Tube Diameter 4”
Outer Dust Tube Height Above Table 13.6”
Outer Dust Tube Height Above Floor 33.5” to 50”
The SawStop Floating Dust Collection Guard is designed as a blade cover and dust
collection hood. It is intended for use on SawStop cast iron table saws. The transparent
oating guard back plate can be cut or removed to provide clearance for safety devices
such as riving knives, splitters, and anti-kickback pawls. The Floating Dust Collection
Guard is compatible with dado stacked blades.