Need help?Do you have a question about the SBC FSR Enduro and is the answer not in the manual?
Discusses the dangers of downhill racing, jumping, and stunt riding. Recommends safety gear and inspection.
Details compatibility for aftermarket and Specialized forks with different steerer tube types.
Explains minimum seatpost insertion requirements for carbon and aluminum frames to prevent damage.
Provides guidelines for setting sag on Enduro bikes for optimal suspension performance.
Explains compression damping adjustments for RP23 BV and RP2 shocks based on riding conditions.
Details how to adjust rebound damping for RP23 BV, RP2, and DHX RC2 shocks for different riding styles.
Describes the function of the IFP in the DHX RC2 shock and its pressure range for damping control.
Explains symbols used in the Enduro Air Chart for shock setup parameters like rebound and compression.
Lists recommended spring rates for the DHX RC2 shock based on frame size (SM, MD, LG, XL).
Step-by-step instructions for installing the derailleur guard, including part numbers and torque.
Provides a chart for determining front derailleur position based on derailleur type and bike model.
Details front derailleur selection for SRAM DMD and Shimano DMD systems based on chainring size.
Provides specific guidelines for seatpost installation on carbon frames, including torque and materials.
Instructions for installing threaded bottom brackets, including cleaning, greasing, and torque specifications.
Refers to the carbon crank installation guide for assembly instructions for oversized bottom brackets.
Discusses the dangers of downhill racing, jumping, and stunt riding. Recommends safety gear and inspection.
Details compatibility for aftermarket and Specialized forks with different steerer tube types.
Explains minimum seatpost insertion requirements for carbon and aluminum frames to prevent damage.
Provides guidelines for setting sag on Enduro bikes for optimal suspension performance.
Explains compression damping adjustments for RP23 BV and RP2 shocks based on riding conditions.
Details how to adjust rebound damping for RP23 BV, RP2, and DHX RC2 shocks for different riding styles.
Describes the function of the IFP in the DHX RC2 shock and its pressure range for damping control.
Explains symbols used in the Enduro Air Chart for shock setup parameters like rebound and compression.
Lists recommended spring rates for the DHX RC2 shock based on frame size (SM, MD, LG, XL).
Step-by-step instructions for installing the derailleur guard, including part numbers and torque.
Provides a chart for determining front derailleur position based on derailleur type and bike model.
Details front derailleur selection for SRAM DMD and Shimano DMD systems based on chainring size.
Provides specific guidelines for seatpost installation on carbon frames, including torque and materials.
Instructions for installing threaded bottom brackets, including cleaning, greasing, and torque specifications.
Refers to the carbon crank installation guide for assembly instructions for oversized bottom brackets.
To Next Page
General