SBM MTH 100 DI User Manual

12
Mo * n° 01  07 : 00 = Clr
modify (+/
-
) / yes (

)
MINUTES :
SETPOINT :
After each setpoint validation,
the module automatically goes back
to step no. 01.
Mo * n° 01  07 : 00 = Tr
next (+/
-
) / yes (

)
Mo * n° 01  07 : 00 = Clr
modify (+/-) / yes ()

+
-
or
To validate and move on to minutes setting


HOUR :
NEW
STEP
:
To select the hour

+
-
or
To validate and move on to selection
of corresponding setpoint



+
-
or


Mo * n° 01  07 : 00 = Tr
modify (+/-) / yes ()


Validate and repeat as many times as
required to finish Monday's programming.
Mo * n° 02  00 : 00 = Clr
modify (M) / exit ()
Mo * n° 05  17 : 15 = Tn
modify (+/-) / yes ()


Mo * n° 01  07 : 00 = Tr
next (+/
-
) / yes (

)
To select the minutes

+
-
or

M
To select the next step
You will then move on to the
2
nd
programming step for Monday
For each possible step, select :
Tc : confort Temperature
Tr : reduced Temperature
Tn : night Temperature
Clr : Clear the programme step
(time + setpoint)
To select the temperature setpoint
To validate and move on to next step
To validate the final step for Monday (no. 05)
After validating the 5th step, step no.01
will flash again
NEXT DAY :
To move on to the next day (Tuesday)
Move down the steps no.01 to 07

+

+
……
….
}
!

SBM MTH 100 DI Specifications

General

Brand	SBM
Model	MTH 100 DI
Category	Control Unit
Language	English