To Next PageTo Next Page
Need help?Do you have a question about the SBM MTH 100 DI and is the answer not in the manual?
General| Input Voltage | 24 V DC |
|---|---|
| Output Voltage | 24 V DC |
| Current Rating | 10 A |
| Operating Temperature | -20°C to +60°C |
| Enclosure | IP20 |
| Protection | Overload, Short Circuit |
Details the single speed control with clock and yearly programming capabilities.
Specifies the 230 V AC single phase with neutral power requirement.
Describes the 1 heating output with a maximum rating of 4 A.
Details the output for an external push-button enabling override On.
Specifies the output for a heating cut-off safety switch (Normally Closed).
Defines the temperature display range from -5 °C to +52 °C in 0.1 °C steps.
Explains the three available temperature setpoints: Tc, Tr, and Tn.
Specifies the setpoint adjustment range from 0 °C to +47 °C in 1 °C steps.
Covers weekly programming (7 steps/day) and yearly programming (10 dates).
Information on the minimum duration for clock and programming back-up.
Details the maximum count for the heating period counter.
Instructions for mounting the unit on a 35 mm DIN symmetrical rail.
Provides the physical dimensions: Height, Width, and Depth.
Specifies the operating temperature range for casing and sensor.
Guide for initial setup and testing of the heater operating mode.
Details for mounting the MTH100 DI on a DIN rail within an enclosure.
Wiring diagram for connecting the MTH100 DI with RI heaters or radiant tubes.
Wiring details for connecting sensors, push-buttons, and power supply.
Step-by-step guide for assembling the temperature sensor kit.
Explains device displays, menus, and provides a programming overview.
Step-by-step guide for programming the device's heating schedules.
How to program special dates and periods with different heating schedules.
Details on special programmes E1 and E2 for exceptional dates/periods.
Guide to setting comfort, reduced, and night temperatures.
Inputting daily heating schedules for the week.
Detailed steps for setting hours, minutes, and setpoints for programming.
Specific menu for copying weekday programming to other days.
Setting specific dates for exceptional heating programs.
Setting a period of days for exceptional heating programs.
Configuring special programmes E1 and E2.
Guide to setting the device's internal clock and date.
Information on heating time counter and gas usage estimation.
Details on Auto, Maxi (comfort), and Mini (night) operating modes.
How to switch between control modes using buttons or external push-button.
Procedure for the initial setup upon first switching on the module.
Instructions for modifying the selected language.
Troubleshooting for low/high temperature readings and sensor faults.
Notes on unprogrammed menus and accessing preset mode.
Troubleshooting for heating stoppage due to safety switch or ventilation defects.
Information on the safeguard battery status and when to contact the distributor.
