Need help?Do you have a question about the SBM SB-1050 and is the answer not in the manual?
Place the machine on a secure, stable surface to prevent damage from falling.
Ensure correct power is supplied. Contact electric company if unsure of power type.
Use a grounded (three-hole) outlet for three-prong plugs for safety.
Avoid plugging too many electrical devices into a single outlet or extension cord.
Unplug before cleaning. Use a soft, damp cloth; avoid aerosol cleaners.
Never use the machine near a gas leak, as sparks can cause fire or explosion.
Follow safety rules: do not insert objects, avoid water, protect cords, keep away from children.
Regular maintenance and sensor cleaning are crucial for optimal machine performance.
Keep fingers and other body parts away from hazardous moving parts.
Details error messages displayed on the LCD and provides steps for troubleshooting.
Adjusts reference levels for Hopper and Double sensors for accurate detection.
Tests LEDs, Hopper, and sensor logic status with doors open/closed.
Tests control panel key inputs and the operation of main and feed motors.
Step-by-step guide for performing UV shading using a specialized sheet.
Instructions for performing Magnetic Reader (MR) shading using a specific banknote.
Steps to perform IR shading (White) and display the resulting values.
Steps to perform IR shading (Dark) and display the resulting values.
Details error messages ('NG', 'NO SHEET') for UV, MR, and IR shading processes.
Procedure to adjust the Automatic Document Feeder (ADF) gap for proper note feeding.
Adjusting the timing of ADF and pickup rollers to prevent feeding errors.
Adjusting the guide selector to prevent note damage and jamming (Jam3).
Steps to enter Hopper Test Mode and adjust sensor sensitivity using a variable resistor.
Adjusting sensitivity for Reject F (Front) and Reject R (Rear) sensors.
Details setting voltages for Reject F and Reject R sensors using test points.
Steps for saving, inserting USB, and initiating the software upgrade.
Checking software version and checksum post-upgrade; troubleshooting tips.
Place the machine on a secure, stable surface to prevent damage from falling.
Ensure correct power is supplied. Contact electric company if unsure of power type.
Use a grounded (three-hole) outlet for three-prong plugs for safety.
Avoid plugging too many electrical devices into a single outlet or extension cord.
Unplug before cleaning. Use a soft, damp cloth; avoid aerosol cleaners.
Never use the machine near a gas leak, as sparks can cause fire or explosion.
Follow safety rules: do not insert objects, avoid water, protect cords, keep away from children.
Regular maintenance and sensor cleaning are crucial for optimal machine performance.
Keep fingers and other body parts away from hazardous moving parts.
Details error messages displayed on the LCD and provides steps for troubleshooting.
Adjusts reference levels for Hopper and Double sensors for accurate detection.
Tests LEDs, Hopper, and sensor logic status with doors open/closed.
Tests control panel key inputs and the operation of main and feed motors.
Step-by-step guide for performing UV shading using a specialized sheet.
Instructions for performing Magnetic Reader (MR) shading using a specific banknote.
Steps to perform IR shading (White) and display the resulting values.
Steps to perform IR shading (Dark) and display the resulting values.
Details error messages ('NG', 'NO SHEET') for UV, MR, and IR shading processes.
Procedure to adjust the Automatic Document Feeder (ADF) gap for proper note feeding.
Adjusting the timing of ADF and pickup rollers to prevent feeding errors.
Adjusting the guide selector to prevent note damage and jamming (Jam3).
Steps to enter Hopper Test Mode and adjust sensor sensitivity using a variable resistor.
Adjusting sensitivity for Reject F (Front) and Reject R (Rear) sensors.
Details setting voltages for Reject F and Reject R sensors using test points.
Steps for saving, inserting USB, and initiating the software upgrade.
Checking software version and checksum post-upgrade; troubleshooting tips.
General| Brand | SBM |
|---|---|
| Model | SB-1050 |
| Category | Cash Counter |
| Language | English |
To Next Page
