To Next PageTo Next PageWhat to do if Scag Power Equipment STC61V-25CV Lawn Mower leaves strips of uncut grass between cutting paths?
If your Scag Power Equipment Lawn Mower is leaving strips of uncut grass between cutting paths, increase the overlap of each pass.
General| Brand | Scag Power Equipment |
|---|---|
| Model | STC61V-25CV |
| Category | Lawn Mower |
| Language | English |
Provides an overview of the manual's purpose and mower care.
Explains directional references used throughout the manual for clarity.
Outlines what engine/drive train service is covered and what requires a dealer.
Defines symbols used in the manual for warnings, controls, and indicators.
Emphasizes operator safety and responsibility for accident prevention.
Explains the meaning of DANGER, WARNING, and CAUTION signal words for hazard identification.
Lists critical safety checks and precautions before operating the mower.
Details safe operating practices, including slope limits and speed control.
Explains the importance and proper use of the Roll-Over Protection System (ROPS) and seat belt.
Covers safe practices for maintenance, storage, and handling fluids.
Addresses spark arrestor requirements for operating the mower in specific environments.
Highlights the importance of safety decals and their correct placement on the machine.
Details engine type, horsepower, cylinders, fuel, oil, and starter specifications.
Lists battery, charging system, polarity, starter, and instrument panel specifications.
Covers drive system, motors, steering, parking brake, and wheel specifications.
Specifies deck type, construction, cutting width, height adjustment, blades, and discharge.
Provides details on the hydraulic oil filter and reservoir capacity.
Lists length, tracking width, overall width, height, and operating weight.
Estimates cutting width and acres per day based on speed and overlap.
Identifies and explains the function of all mower and engine controls.
Details the mower's safety interlock system preventing operation without proper setup.
Outlines procedures for the first 20 hours of operation, including checks and oil changes.
Provides step-by-step instructions for safely starting the mower engine.
Explains how to operate the mower's steering and ground speed controls.
Describes how to engage and disengage the mower deck drive system.
Offers safety advice and operational guidance for mowing on slopes.
Details the correct procedure for safely parking the mower.
Provides instructions for cleaning and post-operation checks.
Explains how to safely remove material clogging the discharge chute.
Instructs on how to move the mower manually when the engine is off.
Offers tips for optimal mowing performance and lawn appearance.
Explains how to adjust the mower deck cutting height.
Provides safety guidelines for towing the mower with attachments.
Details how to adjust the parking brake linkage for proper function.
Covers adjustments for neutral tracking and steering alignment.
Notes that these adjustments should be done by a dealer.
Advises on checking belt alignment and wear.
Highlights the importance of belt alignment for mower performance.
Covers procedures for adjusting deck level, pitch, and height.
Explains how to adjust the baffle for optimal cutting performance.
Details the procedure for adjusting the electric clutch air gap.
Provides a schedule for recommended maintenance tasks based on operating hours.
Lists lubrication points, intervals, and lubricants.
Covers checking and changing hydraulic oil level and filter.
Details checking and changing engine oil and filter.
Explains fuel tank filling and replacing the fuel filter.
Covers cleaning and replacing the air cleaner element.
Provides safety precautions and procedures for charging and jump-starting the battery.
Advises on checking drive belts for alignment and wear.
Covers blade inspection, sharpening, and replacement procedures.
Specifies recommended tire pressures for caster and drive wheels.
Provides instructions for cleaning and maintaining the mower's body and seat.
Lists approved attachments and accessories for the mower.
Illustrated parts breakdown for 48V and 52V cutter decks.
Illustrated parts breakdown for the 61V cutter deck.
Illustrated parts breakdown for cutter deck control mechanisms.
Illustrated parts breakdown for the STC suspension seat assembly.
Illustrated parts breakdown for various sheet metal components.
Illustrated parts breakdown for the mower's drive system.
Illustrated parts breakdown for the engine and related components.
Illustrated parts breakdown for the mower's steering system.
Illustrated parts breakdown for the mower's braking system.
Identifies part numbers for Hydro-Gear and Parker wheel motors.
Illustrated parts breakdown for the fuel and hydraulic systems.
Illustrated parts breakdown for the mower's electrical system.
Illustrated parts breakdown for the BDP-10A hydraulic pump.
Lists available replacement decals and information plates.
Diagram of the mower's electrical system wiring.
