9
SAVING BATTERY POWER
AVAILABLE TARE FUNCTIONS
This function activates when the scale is completely unloaded and has not been used for a set amount of time (standard 5 minu-
tes). To activate or deactivate automatic switching off, go into the autoff section in the configuration menu (see page 49).
WARNING
In accumulation and formulation mode, automatic switching off causes the accumulation in progress to be lost.
The instrument is equipped with advanced battery power saving functions designed to increase operating time.
The instrument allows you to choose from specific tare functions for your needs:
• “Locked” tare (standard factory configuration).
• “Unlocked” tare: automatically deleted every time the scale is unloaded. Useful in preventing errors when the tare is different
for every weighing.
• Tare acquired automatically by the scale. Tare is only acquired if there is no other saved tare value.
• Tare function disabled.
To customise the tare function, go into the tare section in the configuration menu (see page 49).
Saving battery power requires advanced configuration.
Main features of the scale
AUTOMATIC SWITCHING OFF
NU2-IPC20_50-E-0918
To Next Page
Loading...
