8 ASSEMBLY
2 x rivets Ø6/Ø10.5x25
Rivets are used only if you have
chosen to connect the Scan 57
with fixed base.
Rivets are used only if you have chosen to
connect the Scan 57 with fixed base.
4 x allen screws M8 x 25
6 x deep groove ball bearings
6 x axles for deep groove ball bearings
4 x bushes
4 x guide bushes
Turn the pedestal joint to the rear.
Assembling the base
1 x lock washer
To Next Page
Loading...
