SCAN 65 - Removal of Packaging; Handle and Door

15
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064020.idw
90064020
Brændeovn på palle
21-08-12
BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064020.idw
90064020
Brændeovn på palle
21-08-12
BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
1
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064027.idw
90064027
Montage afdækningsknapper
11-07-11
BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
2
3
4
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 64\90064044.idw
90064044
Justerskruer
10-08-11
BC
Scan 64
VÆGT:
AREAL:
N/A
N/A
REMOVAL OF PACKAGING
Check that the stove is not damaged before starting to install it.
Remove the screws securing the stove to the pallet
Remove the protection between the baffle plates,
before taking the stove into use!
Put back the upper plate on the pins,
as the protection pushes the plate upwards
Fit the plastic plugs from the service box
into the transport protection holes
HANDLE AND DOOR
NOTE: When the stove is new, the door may stand out a little from the stove,
and the handle may feel tight, as the stove has to be fired a couple of times,
before the gasket “settles”. This is quite normal.
Handle