Scaneo TS42B - Measuring Body Temperature on the Forehead; Measuring Body Temperature in the Ear

Measuring Body Temperature on the Forehead
NOTE:
The forehead/temples must be free from sweat and
cosmetics and that taking medication and skin irritations can
distort the result when measuring temperature on the
forehead.
1. Press the Forehead mode button or On botton for 1
second to switch the thermometer on. Following a
successful self test, the device emits two short beeps.
2. Place the measuring head with the Forehead/Cover cap
fitted on the temples, hold on the Forehead mode Button
and move the thermometer smoothly over the forehead
to the other temple.
3. Release the Forehead Scan Button. The end of the
measuring time is signaled with a short beep and the
measured value appears on the display.
11
Measuring Body Temperature in the Ear
1. Press the Power button for 1 second to switch the
thermometer on. Following a successful self test, the
device emits two short beeps.
2. Remove the cap by gently pushing it up (1) and then
pulling it off forwards (2).
3. Make sure that the sensor tip and also the ear canal are
clean. As the ear canal is slightly curved, you have to pull
the ear slightly up and backwards before inserting the
sensor tip. This is important so that the sensor tip can be
pointed directly at the eardrum.
Position thermometer probe
properly in ear canal:
• Under 1 year:
Have child lay flat with the head sideways, so that the ear is
facing upwards. Gently pull the ear straight back.
• 1 year +:
Stand behind and slightly to the side of the child/adult.
Gently pull the ear up and back to straighten the ear canal.
4. Insert the sensor tip carefully and press the Power button
for 1 second.
12