Scania Radio Medium - Activating;Deactivating Sound Signal (BEEPTONE)

18
Change the call or ringtone volume using the radio volume button or steering wheel
volume button.
Note
Tip when using Bluetooth
• You can use the radio Bluetooth function without using the steering
wheel buttons or the instrument cluster display. It is not, however,
something that Scania recommends to drivers, since using it in such a
way adversely affects road safety.
Activating/deactivating sound signal (BEEPTONE)
A signal (beep) will sound when:
• Press and hold down a station button to store a station.
• The maximum temperature in the CD player is exceeded.
• A faulty CD is detected.
• No station broadcasting traffic information is in reach when traffic
information priority is activated.
To turn off the sound signal:
 Press the MENU button (6).
 Press button or (7) (may need to press several times) until "BEEPTONE" is
shown in the display (5).
 Press button or (7) once, to show the current setting, "BEEP ON" or "BEEP
OFF".
 Press button or (7) again, to switch between settings.
 Press button or (7) to adjust additional settings in the menu,
or
 press the MENU button (6), to save all settings and close the menu.