Scania Radio Medium - Setting BASS; Setting MIDDLE; Volume Balance Left;Right (BALANCE); Activating LOUDNESS

20
Setting BASS
 Press button AUD (8).
 Press button or (7) (may need to press several times) until "BASS" appears
in the display (5).
 Press button or (7) once, to display "BASS" and the current setting.
 Press button or (7) again, to set bass level from -7 to +7.
 Press button or (7) to adjust additional settings in the menu,
or
 press the AUD button (8), to save all settings and close the menu.
Setting MIDDLE
 Press button AUD (8).
 Press button or (7) (may need to press several times) until "MIDDLE"
appears in the display (5).
 Press button or (7) once, to display "MID" and the current setting.
 Press button or (7) again, to set middle level from -7 to +7.
 Press button or (7) to adjust additional settings in the menu,
or
 press the AUD button (8), to save all settings and close the menu.
Volume balance left/right (BALANCE)
 Press button AUD (8).
 Press button or (7) (may need to press several times) until "BALANCE" is
shown in the display (5).
 Press button or (7) once, to display "BAL" and the current setting.
 Press button or (7) again, to set volume balance left/
right from -10 to +10.
 Press button or (7) to adjust additional settings in the menu,
or
 press the AUD button (8), to save all settings and close the menu.
Activating LOUDNESS
Loudness increases the volume on treble and base frequencies and improves sound,
particularly at low volumes.
 Press button AUD (8).
Menu option "LOUDNESS" is displayed.
 Press button or (7) once, to show the current setting, "LD ON" or "LD OFF".
 Press button or (7) again to switch between settings.
 Press button or (7) to adjust additional settings in the menu,
or
 press the AUD button (8), to save all settings and close the menu.