23
Radio
The radio is equipped with an RDS radio receiver. In addition to the programme itself,
many FM radio stations also transmit signals containing information such as the
station name and programme type (PTY).
If the RDS station transmits its name, it will be shown directly in the display (5).
Switching on the radio
If you are listening to another audio source:
press the BND button (2)
or
press theSRC button (12) (may need to press several times) until "RADIO" is
shown in the display (5).
The current frequency and station name will appear in the display (5).
RDS functions (AF, REGION)
RDS functions AF (alternative frequency) and REGION (regional) increase radio
capabilities.
AF: When the RDS function is activated, the radio will automatically tune in to the
best receivable frequency for the current station.
REGION: Some stations periodically divide their programmes into regional
programmes with different content. The activated REGION function prevents the
radio from changing to alternative frequencies that are broadcasting different
programme content.
Note
REGION must be activated and deactivated separately in the menu.
Switching the RDS function ON/OFF
To use the RDS functions AF and REG, press the RDS button (11).
The RDS function is activated when the RDS symbol appears in the display (5).
REGION ON/OFF
Press the MENU button (6).
Menu option "REGION" is displayed.
Press button or (7) once, to show the current setting, "REG ON" or "REG
OFF".
Press button or (7) again to switch between settings.
Press button or (7) to adjust additional settings in the menu,
or
press the MENU button (6), to save all settings and close the menu.
Note!
The REG ON/OFF setting will only work if the RDS function is activated.
To Next Page
Loading...
