Scania Radio Medium - Page 22

22
 Press button or (7) (may need to press several times) until "STAG-LSP"
appears in the display (5).
 Press button or (7) once, to display "STAG" and the current setting.
 Press button or (7) again, to select the desired setting.
 Press button or (7) to adjust additional settings in the menu,
or
 press the MENU button (6), to save all settings and close the menu.
Optimization of staging for subwoofer (STAG-SUB) (accessory)
This setting requires a correctly installed subwoofer.
Available settings, -9 till +9:
 0: No subwoofer offset.
 +1 till +9: Virtual forward offset of subwoofer.
 -1 till -9: Virtual backward offset of subwoofer.
Note
This setting option is only available when staging is activated.
To set staging for the subwoofer,
 press the MENU button(6).
 Press button or (7) (may need to press several times) until "STAG-SUB" is
shown in the display (5).
 Press button or (7) once, to display "OFFSET" and the current setting.
 Press button or (7) again, to select the desired setting.
 Press button or (7) to adjust additional settings in the menu,
or
 press the MENU button (6), to save all settings and close the menu.