ScanBas 365 Page 7
2.6 Adding, removing and reordering measurement boxes
To add measurement boxes to a measurement panel, press the "+"
button on the top left, and select "Measurement boxes" in the drop-
down menu.
This will display a list of all available measurement boxes. To add a
measurement box to a panel, drag and drop the desired measurement
box into the measurement panel.
To remove a measurement box from a panel, press the "X" button in the
banner above the desired measurement box.
You can freely change the order of the measurement boxes by selecting
the banner of a measurement box and drag and drop it in its desired
location.
To Next Page
Loading...