48
www.scanmaskin.com
3.3 Personnel selection and qualification
Fundamental duties:
• Work with the machine may only be undertaken by trained personnel.
• Specify clearly the responsibilities of personnel for operation, setting up, servicing and mainte-
nance work!
• Make sure that only authorized personnel operate or work with the machine!
• Define responsibilities of the machine operator, with regard to traffic safety regulations, and
inform him not to take instructions from third parties who may not be complying with the local
safety requirements.
• Personnel, who are being trained to operate equipment, may only use the machine under
constant supervision of an experienced person!
• Work on electrical equipment may only be undertaken by a skilled electrician or by trained
persons under the supervision of a skilled electrician, as well as in accordance with the local
electrical engineering regulations.
3.4 Safety regarding operation of machine
Do not allow any method of working that impairs safety!
Recognized official procedures have to be used to ensure the machine is operated in safe and
best conditions.
Only operate the machine when all safety devices and related safety equipment are present and
operational!
Check the machine visually for any damage and defects at least once a day.
In the event of operational malfunctions the machine must be shut down immediately and secu-
red!
Secure the work area around the machine in public areas providing a safety distance of at least 10
m (3.3 ft) from the machine.
Faults must be immediately rectified.
Carry out the switch on, and switch off operations in accordance with this user guide.
Before switching on the machine make sure that no-one can be endangered when the machine
starts up.
Never operate the machine when not in its upright position.
To Next Page
Loading...
