2 Safety information
READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE INSTALLING,
CONFIGURATING AND OPERATING THIS PRODUCT!
MAKE SURE THAT YOU, THE OPERATOR OR SERVICE TECHNICIAN, HAVE FULLY
UNDERSTOOD THE SAFETY INSTRUCTIONS BEFORE PROCEEDING
IMPORTANT!
The system installer is responsible for producing an instruction manual for the application
where the SCANRECO G5 system has been installed and intended to control.
The system installer is responsible for producing a product approval, if such is required, for the
application where the SCANRECO G5 system has been installed.
Prior to operation, the system installer is required to train the operator on all functions available
using the SCANRECO G5 system.
Prior to operation, the system installer is required to inform the operator of all potential
hazardous situations that may appear when operating the application with the SCANRECO G5
system.
The system installer must take into account the specic installations instructions declared in
this instruction manual.
Due to the unlimited variety of applications (cranes, machines, objects, vehicles and other
equipment) on which the remote control system is used, and the numerous standards which
are frequently the subject of varying interpretation, it is impossible for the personnel at
SCANRECO to provide expert advice regarding the suitability of a given remote control for a
specic application. It is the responsibility of the purchaser and system installer to determine
the suitability of any SCANRECO remote control product for an intended application and to
ensure that it is installed and guarded in accordance with all country, federal, state, local, and
private safety and health regulation, codes, standards and the SCANRECO instructions in this
document.
If the SCANRECO G5 system will be used in a safety critical application, the purchaser / system
installer must undertake appropriate testing and evaluation of the nal application to prevent
injury to the end user.
SCANRECO does not take responsibility for any damage or injury.
Unauthorized tampering with any of the products will automatically void the SCANRECO
guarantee and product responsibility.
2.1 General
5/33
To Next Page
Loading...
Need help?
General
