Need help?Do you have a question about the Scanreco RC400 and is the answer not in the manual?
General| Category | Remote Control |
|---|---|
| Model | RC400 |
| Operating Temperature | -20°C to +55°C |
| Power Source | Battery |
| Protection Class | IP65 |
Guidance for crane operators on system familiarization and key chapters to read.
Guidance for installers on essential chapters for system setup and understanding.
Step-by-step guide on how to operate the Scanreco RC 400 system safely.
General guidelines for installing the RC 400 system, including safety precautions.
Procedure for reversing crane movement direction if initially incorrect.
How to interpret system LEDs, perform basic checks, and identify error messages.
Troubleshooting schematics, internal box checks, and common system failures.
Diagnosing issues with the control unit and specific function malfunctions.
Procedures for testing modes, diagnosing radio/cable faults, and programming issues.
Functions accessible to the installer, such as changing crane direction.
Advanced settings for installers/service personnel, including speed adjustments.
Expert level settings for manufacturers, covering manoeuvre curves and complex functions.
How to adjust the initial speed (start speed) for manoeuvre valve operations.
Procedure to set maximum speed limits for specific functions or ports.
Adjusting the final speed for micro-speed control on specific ports.
To Next Page
