Scanreco RC400 User Manual

Installation instructions 4 - 3
Doc.nr : 6611-018
,QVWDOODWLRQDQGPRXQWLQJLQVWUXFWLRQV
(OHFWURQLFER[
,PSRUWDQW The electronicbox must be mounted in accordance with the recommendations
given below! To ensure the longest possible life for the electronicbox and its cables, the
electronicbox must always be mounted so that the valve contacts are located facing
downwards. The electronicbox must not be mounted so that the cables face upwards. The
reason for this is to hinder water from running via the cables, towards the electronicbox.
( The cables on the electronicbox are thus not subjected to long periods of accumulated water, damp, salt etc. ).
The electronicbox should be mounted in a vibration free location and not close to strong heat
sources ( for example exhaust pipes etc. ). 6HHDOVRSDJH
2.2.:521*
5DGLRUHFHLYHUER[
,PSRUWDQW: The radio receiver box must be mounted in accordance with the recommendations
below!
The radio receiver box must be mounted in a vibration free location and not close to strong
sources of heat ( for example exhaust pipes etc. ). 6HHQH[WSDJH
2.:521*:521*
hydrostat.ru

Scanreco RC400 Specifications

General

Category	Remote Control
Model	RC400
Operating Temperature	-20°C to +55°C
Power Source	Battery
Protection Class	IP65