Scantool RB 75X - Default Chapter; Table of Contents

2
Table of contents
1. TRANSPORT AND HANDLING 3
2. INSTALLATION AND ADJUSTMENT 4
2.1 MOUNTING THE PIPE NOTCHING AGGREGATE, PURCHASED AS EXTRA EQUIPMENT 4
2.2 INSTALLING BELT GRINDER AND MOUNTING RB-AGGREGATE. 6
2.3 THOROUGH ADJUSTMENT OF THE SANDING BELT. 11
3. USERS GUIDE 11
3.1 OPERATION 12
3.2 SAFETY RULES FOR STATIONARY TOOL MACHINES. 13
3.3 MAINTENANCE 15
3.4 ROLL HOLDER – LOCATION OF CONTACT DISCS 15
3.5 ADJUSTMENT OF THE PIPE HOLDER’S HEIGHT COMPARED TO THE ROLLER 16
3.6 ANGLE OF PIPE NOTCHING 17
3.7 SIDE ADJUSTMENT 18
3.8 PLACEMENT OF ITEM 18
4. SPARE PARTS 19
4.1BELT GRINDER WITH NO EXHAUST 19
4.2 BELT GRINDER WITH EXHAUST 21
4.3 RB AGGREGATE 23
4.4 CONTACT DISCS 25
4.5 SANDING BELTS 27
5. TECHNICAL DATA 29
5.1 TECHNICAL SPECIFICATIONS 29
5.2 DIMENSIONS 30
5.3 CIRCUIT DIAGRAMS 31
5.4 PRESSURE DIAGRAM 35
5.5 WARRANTY 35