3
1. Transport and handling
The products can swiftly be transported on the pallet they arrive on. Remove the
packaging.
When you receive grinder and RB-aggregate as a set.
SCANTOOL belt grinder and RB-aggregate comes installed on a pallet wrapped in
protective packaging with the following dimensions: 1200 x 800 mm. The roll
holder, that is a part of the aggregate is mounted on the grinder.
When you receive the RB-aggregate as a extra equipment for you grinder.
An RB-aggregate is delivered mounted to a pallet. You can see the aggregate below.
Fig.: 1.1 Complete pipe notching attachment
Remove the packaging and the fastening screws in the pallet and lift the belt
grinder and the aggregate of the pallet.
To Next Page
Loading...
