How to make Sceptre A32 AndroidTV picture cover the entire screen?
If the picture on your Sceptre Smart TV doesn't cover the entire screen, and you're using HDMI or a digital channel, use the ASPECT button to switch to 16:9 format. If you're using a regular analog channel, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9 to fill the screen.
What to do if my Sceptre Smart TV has no picture?
If your Sceptre Smart TV screen is blank, ensure the power cord is correctly connected and the power is turned on. Also, check that the video cable is properly connected. Select the correct input signal source using the source button, making sure it matches the cable connection you are using.
Why does my Sceptre Smart TV have picture only but no audio?
If your Sceptre Smart TV shows a picture but has no sound, ensure the audio cable is properly connected. Also, check and readjust the volume using the remote control. The TV’s tuner signal must not be lower than 65 %.
Why does my Sceptre A32 AndroidTV have audio only but no picture?
If your Sceptre Smart TV has sound but no picture, ensure that both your video and audio cables are connected correctly. The TV’s tuner signal must not be lower than 65 %.
How to fix abnormal colors on Sceptre Smart TV?
To correct abnormal colors on your Sceptre Smart TV, ensure that the colors on the cables match the ports on the back of the TV. For example, connect the red cable to the red colored port.
Why does my Sceptre A32 AndroidTV turn off automatically after 10 minutes?
Your Sceptre Smart TV features a power saving mode that automatically turns off the display if there is no signal provided for more than 10 minutes.
Why does switching a channel or source change the volume on my Sceptre A32 AndroidTV Smart TV?
Switching channels or sources can change the volume on your Sceptre Smart TV because different channel signals have varying loudness levels. The display has an AUTO VOLUME LEVEL function that can help manage this. Ensure that this function is turned on.
Why is there noise or trash pixels on the screen of my Sceptre A32 AndroidTV?
Noise or trash pixels appear on your Sceptre Smart TV screen when the display's resolution is higher than the digital channel’s broadcast resolution, causing the signal to be up-converted to match your display’s resolution.
Why does my Sceptre A32 AndroidTV picture have abnormal sound or is distorted?
Distorted picture or abnormal sound on your Sceptre Smart TV might be due to interference from large electrical appliances, cars, motorcycles, or fluorescent lights. If the TV is close to a wall, try moving it to another room to see if the problem persists.
How to unblock channels on Sceptre A32 AndroidTV?
To unblock channels on your Sceptre Smart TV, check the auto lock function’s settings within the OSD. You may have locked some channels and forgotten about it. Refer to the parental or channels options for more instructions.
Instructions for connecting an antenna to the TV's tuner.
Details Sceptre's obligations, service labor, parts, and repair/replacement options.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| Smart TV | Yes |
| Operating System | Android TV |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Refresh Rate | 60 Hz |
| Smart Features | Google Assistant, Chromecast built-in, Google Play Store |
| Resolution | 1366 x 768 (720p) |
To Next Page