To Next PageTo Next PageWhat to do if my Sceptre A32 AndroidTV Smart TV cannot receive sufficient channels through the ATSC/NTSC tuner?
If your Sceptre Smart TV isn't receiving enough channels, it may be because the tuner signal is lower than 65 %. Try changing the direction of your antenna and rescan the channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
What to do if my Sceptre A32 AndroidTV Smart TV picture is too dark?
If the picture on your Sceptre Smart TV is too dark, adjust the contrast, brightness, and lamp settings from the OSD Menu. Refer to the picture settings option for adjustment controls.
How to fix abnormal colors on Sceptre Smart TV?
To correct abnormal colors on your Sceptre Smart TV, ensure that the colors on the cables match the ports on the back of the TV. For example, connect the red cable to the red colored port.
Why does my Sceptre A32 AndroidTV have audio only but no picture?
If your Sceptre Smart TV has sound but no picture, ensure that both your video and audio cables are connected correctly. The TV’s tuner signal must not be lower than 65 %.
Why does my Sceptre Smart TV have picture only but no audio?
If your Sceptre Smart TV shows a picture but has no sound, ensure the audio cable is properly connected. Also, check and readjust the volume using the remote control. The TV’s tuner signal must not be lower than 65 %.
How to fix Sceptre A32 AndroidTV Smart TV remote control that does not work?
If your Sceptre Smart TV remote control isn't working, try these steps: First, turn off the TV, unplug it, and remove the batteries from the remote for 30 seconds. Press the remote buttons and the power button randomly for a couple of seconds, then reinstall the batteries and test the remote. Also, make sure there is a clear line of sight between the front sensor on the remote and the remote sensor on the display, which is located in the same area as the power indicator light.
How to remove big black box in the middle of Sceptre A32 AndroidTV screen?
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| Smart TV | Yes |
| Operating System | Android TV |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Refresh Rate | 60 Hz |
| Smart Features | Google Assistant, Chromecast built-in, Google Play Store |
| Resolution | 1366 x 768 (720p) |
Instructions for connecting an antenna to the TV's tuner.
Details Sceptre's obligations, service labor, parts, and repair/replacement options.
