E165 SS Series
Page |
2
ATTACHING & REMOVING THE BASE
1. Place the display unit flat on a table with the screen facing downwards. Afterwards slide the display base
onto the metal plate on the back of the display as indicated in the picture.
2. Secure the installation by screwing in the included 3 screws to the bottom of the display base.
3. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we would recommend you to use a Display safety
strap (not included) in order to minimize the possibility of the Display toppling over.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.
To Next Page
Loading...
Need help?
General
