E246BD-FC / E246BV-FC
Page | 2
ATTACHING & REMOVING THE BASE
1. Insert the neck into the base and screw in the 3 screws at the bottom of the base.
2. Insert the neck / base assembly onto the back of the display. Screw in the 3 screws as
indicated to secure the installation.
3. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we would recommend you to use a
Display safety strap (not included) in order to minimize the possibility of the Display
toppling over.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.
To Next Page
Loading...
Need help?
General
