To Next PageTo Next PageWhy is there no sound from my PC on my Sceptre E248?
If there is no sound on your Sceptre HDTV when connected to a PC, make sure you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
How to fix a Sceptre E248 with picture but no sound?
If your Sceptre HDTV has picture but no audio, first ensure that the audio cable is correctly connected. Then, readjust the volume using the remote control. Also, ensure that the TV’s tuner signal is not lower than 65 %.
How to improve channel reception on my Sceptre HDTV?
If your Sceptre HDTV cannot receive enough channels, the TV’s tuner signal must not be lower than 65 %. Change the direction of your antenna and rescan your channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
What to do if my Sceptre E248 HDTV has sound but no picture?
If your Sceptre HDTV has audio but no picture, make sure you have connected both your video and audio cables. Also, ensure that the TV’s tuner signal is not lower than 65 %.
How to brighten the picture on my Sceptre E248?
If the picture on your Sceptre HDTV is too dark, adjust your contrast, brightness, and lamp settings from the OSD Menu.
Why is there noise on my Sceptre E248 screen?
When your Sceptre HDTV's resolution is higher than the digital channel’s broadcast resolution, the signal is up-converted to match your TV’s resolution.
How to remove black box on Sceptre HDTV screen?
If there is a big black box in the middle of the screen of your Sceptre HDTV, you have turned on closed captioning and are using TEXT1 – TEXT4. Change the setting to CC1 or turn off closed captioning and the box will disappear.
Why does my Sceptre E248 HDTV turn on so slowly?
This Sceptre HDTV is a High Definition liquid crystal display panel TV. It requires a few more seconds than normal TVs to power up and show the picture.
How to unblock channels on Sceptre HDTV?
If TV channels are blocked on your Sceptre HDTV, check your auto lock function’s settings inside the OSD. You may have locked up some channels but forgot about them.
How to adjust screen size on Sceptre E248?
If the picture on your Sceptre HDTV does not cover the entire screen, and you’re using HDMI or a TV digital channel, use the ASPECT button to switch to 16:9 format. If you are using VGA, use the AUTO ADJUST function to adjust to the screen. If you are using regular analog TV, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9 in order to fill up the screen.
General| Screen Size | 24 inches |
|---|---|
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Response Time | 5ms |
| VGA Ports | 1 |
| Speakers | 2 x 2W |
| Inputs | HDMI, VGA |
| Resolution | 1920 x 1080 |
| VESA Mount Compatible | Yes |
| Audio Output | 3.5mm |
Guidance on properly grounding television antennas and cable systems for protection against voltage surges and static charges.
Provides initial instructions and precautions for setting up the television, including ventilation and placement.
Explains the specific buttons on the remote control used for ROKU and DVD player functions.
Step-by-step guide for connecting a DVD player using component YPbPr cables for video and audio.
Instructions for connecting a Wii console using composite AV cables for video and audio.
Guide for connecting cable or satellite set-top boxes using an HDMI cable for high-definition output.
Main OSD option for adjusting picture settings like tint, contrast, and sharpness.
Main OSD option for adjusting sound settings like bass, treble, and audio output.
Main OSD option for managing tuner functions like channel scanning and settings.
Provides access to various sound settings including Sound Mode, Bass, Treble, and Balance.
Information on connecting USB flash drives to play music and display pictures.
