To Next PageTo Next PageHow to set 1360x768 resolution on Sceptre X405 via PC VGA?
If you cannot get 1360x768 resolution on PC VGA with your Sceptre HDTV, ensure the TV is recognized as a plug and play monitor. Try updating your video card’s drivers. If that doesn’t work, you may need to upgrade your video card.
Why does my Sceptre HDTV have noise or trash pixels on the screen?
Noise or trash pixels on the screen of your Sceptre HDTV can occur when the TV's resolution is higher than the digital channel's broadcast resolution, causing the signal to be up-converted. This up-conversion process can lead to such visual artifacts.
Why is the picture quality horrible on my Sceptre HDTV?
For the best image quality on your Sceptre HDTV, view HD widescreen programs whenever possible. If HD content isn't available, view "Standard Definition" from a digital source. Standard analog TV will always appear inferior to HD because the TV’s video capabilities are far superior to older TVs, revealing interference and deficiencies.
How to unblock channels on Sceptre HDTV?
If TV channels are blocked on your Sceptre HDTV, check the auto lock function’s settings inside the OSD. You may have locked some channels and forgotten about it.
How to get sound from PC to Sceptre X405?
If there is no sound when using your PC with your Sceptre HDTV, ensure that you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
How to fix no picture on Sceptre X405 HDTV?
If your Sceptre HDTV shows no picture, ensure the power cord is correctly connected and the power is turned on. Also, verify the video cable is properly connected and that you've selected the correct input signal source using the source button, matching the cable connection.
Why does the volume change when I switch channels on my Sceptre HDTV?
When switching channels or sources on your Sceptre HDTV, volume changes can occur because different channels and inputs may have varying signal volumes. To mitigate this, ensure the AUTO VOLUME LEVEL function is enabled on your TV.
How to brighten the picture on Sceptre HDTV?
If the picture on your Sceptre HDTV is too dark, adjust the contrast, brightness, and lamp settings via the OSD Menu.
What to do if Sceptre HDTV remote control does not work?
If the remote control for your Sceptre HDTV isn't working, try these steps: Turn off the TV, unplug it, and remove the batteries from the remote for 30 minutes. Press the remote buttons and the power button randomly for a couple of seconds, then reinstall the batteries. Also, make sure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is located near the power indicator light.
How to adjust screen size on Sceptre LED TV?
If the picture on your Sceptre LED TV does not cover the entire screen: * If you’re using HDMI or a TV digital channel, use the ASPECT button to switch to 16:9 format. * If you are using VGA, use the AUTO ADJUST function to adjust to the screen. * If you are using regular analog TV, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9 to fill the screen.
General| Screen Size | 40 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Built-in Speakers | Yes |
| VESA Mount Compatible | Yes |
| Audio Output | Digital Audio Output, Headphone Jack |
| Inputs | HDMI, USB, Component, Composite |
Guidelines for proper grounding of antenna and cable systems against surges.
Recommendations for protecting the TV during lightning storms or periods of non-use.
Advice on locating the antenna away from overhead power circuits.
Lists all the items included in the SCEPTRE X405 HDTV package.
Instructions for setting up the TV before initial operation.
Details the components and indicators on the front panel of the TV.
Specifies VESA mounting hole dimensions and screw requirements for installation.
Instructions for connecting digital cable directly to the TV tuner.
Steps for powering on the TV and connecting initial devices.
Guide to the initial setup process for antenna or cable input.
Explains using the remote for OSD navigation and adjustments.
Explains using TV side buttons for OSD navigation and adjustments.
Adjusts picture settings like sharpness, color, tint, brightness, and advanced options.
Adjusts sound settings like mode, bass, treble, balance, and SRS effects.
Manages tuner functions: channel lists, favorites, signal type, auto scan.
Filters TV programs and movies based on ratings for children.
Configures miscellaneous options: closed captioning, language, clock.
Resets TV settings and configures features like blue back and power off.
Details USB connection, file playback, media settings, and technical limits.
Instructions for navigating and playing media files from a USB drive.
Steps to add channels to the favorite list for quick access.
Steps to remove channels from the favorite list.
How to navigate and select channels using the favorite list.
Explains the function of color buttons for 2D/3D and channel list display.
Details how direct function buttons control the Sceptre Sound Bar accessory.
Instructions for safely cleaning the TV bezel and remote control.
Guidelines for safely cleaning the TV screen with a microfiber cloth.
Details SCEPTRE's warranty coverage for manufacturing defects and part replacement.
Explains warranty service labor coverage and procedures for obtaining service.
Describes the warranty coverage and limitations for replacement parts.
Outlines SCEPTRE's service options for defective parts and panel replacement.
Provides instructions for packaging and shipping the product for authorized service.
Lists exclusions from the product warranty, such as cosmetic defects and misuse.
