EasyManuals Logo

Schaerer Coffee Art C User Manual

Schaerer Coffee Art C
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
- 14 -
User Manual | 03.2021 | v04
www.schaererusa.com Operation | General Operation
Switching the Coffee Machine to Standby Mode
If the coffee machine is not used for longer periods, i.e. overnight, it can
be switched to standby mode. In this mode, the boiler is not heated and
no beverages are available.
1. Press the icon/button until the message "Standby" appears on the
display.
Extended Idle Time
1. Perform the daily cleaning:
(See section "Daily Cleaning" on pages 17-20).
2. Switch the machine to “Standby” (Press the icon/button).
3. Close the shut-off valve from the fresh water supply.
4. Disconnect the machine from the power supply.
5. Vacuum the coffee beans from the bean hoppers.
6. Store the machine in a dry and clean location. On premises where
temperatures can drop below zero, the boiler has to be emptied. To
empty the boiler, contact a manufacturer-authorized service agent for
assistance.
Equipment shut down, less than 6 weeks
If your system is shut down for less than 6 weeks, the lter should be
ushed for 5 minutes prior to starting the equipment up again.
Equipment shut down, more than 6 weeks
If your system is shut down for more than 6 weeks, a lter cartridge
replacement will be required to ensure proper sanitation and ltration of
the water supplied to the equipment.
Removal / Relocation / Disassembly
Contact a manufacturer-authorized customer service agent.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Schaerer Coffee Art C and is the answer not in the manual?

Schaerer Coffee Art C Specifications

General IconGeneral
ProgrammableYes
DisplayLCD
Power Supply220 V
Beverage OptionsEspresso, Coffee, Cappuccino, Hot Water
TypeAutomatic
GrinderIntegrated

Related product manuals