Schaudt EBL 241-2 Electroblock - Environmental Parameters; Maintenance

Instruction Manual for Electroblock EBL 241-2
9
Date: 16.07.2019
8110514 BA / EN
12 V outputs A maximum of 90% of the nominal
current of the relevant fuse may be
drawn.
For mains operation, the starter battery is also charged (with maximum
charge current of 2.5 A).
5.3 Environmental parameters
-20 Cto+45C
-20 Cto+70C
Operation in dry environment only
CE mark
6 Maintenance
The EBL 241-2 electroblock requires no maintenance.
Clean the electroblock with a soft, slightly damp cloth and mild detergent.
Never use spirit, thinners or similar substances. Do not allow liquids to enter
the electroblock.
No part of this manual may be reproduced, translated or copied without ex-
press written permission.
Current-carrying
capacity
Battery charging of the
starter battery
Operating temperature
Storage temperature
Humidity
CE
Cleaning
E